HeadLite – Navigation Mounts

Chigee AIO-5 Play

Requires 3D-printed parts:

  • CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Mount Chigee Ver 1.0.stl

This design does not reuse the bolt of the Chigee. Instead you need 2 bolts M3 x 10 mm and 1 bolt M5 x 10 mm. The 10 mm is the length of the thread. Do not use longer bolts. The Chigee has a damper build in. Longer bolts will go through the damper and touch the device, conducting all vibrations. 

Quadlock (MK 1)

Requires 3D-printed parts:

  • CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
  • CRF300L – Headlite – Navigation Mount Quadlock Ver 1.0.stl

Quadlock (MK 2)

Requires 3D-printed parts:

  • CRF300L – HeadLite – Navigation Mount Quadlock Ver 2.0.stl

All-in-one Navigation Bracket for Quadlock.

AMPS

Requires 3D-printed parts:

  • CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Mount – AMPS Ver 1.0

An AMPS-plate can be mounted at 3 positions using M5 countersunk bolts.

The Navigation Mount can be used with or without the supports. In case of bolting the mount directly to the Headlight Frame (without supports), the holes need to be enlarged to 6 mm instead of 5.

Basic

Requires 3D-printed parts:

  • CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
  • CRF300L – HeadLite – Navigation Mount – Basic Ver 1.0

The Navigation Mount can be used with or without the supports. In case of bolting the mount directly to the Headlight Frame (without supports), the holes need to be enlarged to 6 mm instead of 5.